Instructions
- 1Pattern making! This step sounds complicated but it's rather simple.Measurements you will need:
Waist, length of skirt.A.Divide the waist measurement by 12 to find the radius.
B.Add the length to the radius of the waist.
C. Use the measurement from B and multiply by 12 This will be the length of your final hem.D. Divide both the waist measurement and final hem measurement (C) by 12.E. On a piece of paper, draw a line down the middle representing the length of your skirt plus seam allowance.
Take your waist measurement divided by 12 (D), add seam allowance (for both sides) and centre this value at one end of the line.
Repeat with the hem measurement divided by 12, at the other end of the central line.F.Connect the ends of the two lines at the top and bottom of the line. You should have a Trapezium shaped pattern piece. - 2
- 3
- 4
- 5If you want to finish the raw edges, now is the time to do so.Iron a fold, as wide as your seam allowance, along the two long sides that are not yet sewn. Make these folds fold onto the wrong side of the fabric.Fold the waistband with the seam inside and pin the skirt piece between the two layers, lining up the edge of the waist band with the unsewn seam of the skirt. Sew together.I then top stitched the top of the waistband to help it keep shape.
- 6Sew in a zip and the rest of the last seam. I'm no good at explaining this, and there are so many good videos on youtube for putting in an invisible zip.
- 7Hem the skirt, use a narrow hem because due to the circle nature of the hem, it will be harder to do a larger hem.(Sorry about the lack of photos for the last steps)by Chocolate
No comments:
Post a Comment