Hand appliqued bag

okay lets get started
supplies needed:
-light weight iron-on fusible interfacing(you can find it at most craft stores)
-one 3 pack of canvas totes measured at 13.5" x 13.5" mine was found at walmart (see link)
-thread for applique (find some at your quilt store. or you can try these suggestions: to get a good  close enough shade to the two shades of lighter pink. and one shade closer to the darker hot pink)

-fabric fusion glue. (i found mine at Micheal's) use that 40% off! this stuff is good and makes it permanent, and helps with the hand applique part of it.




-three shades of solid pink fabric. (found at most quilt shops)

*note: you will only need around 1/8 yard of the dark fabric, and even less for the two lighter shades. so if you have scraps awesome, if not, a fat quarter would be good, but you will have left over fabric. (then again you will have 2 extra bags...)

-now for the template you will need to right click on the image above and save it to your computer, make sure when you print it out you print it out to the full page. this should give you the right size of template. (if not i'll work on getting a pdf linked to it which you will then need to make sure you print it out at 100%)

-make 3 to 5 petals of the lightest shade of pink. i only used three, but play around with it if you want to add a few more petals.

-make 6 to 7 petals of the medium shade of pink. i started out with 6 petals and decided i wanted one more to fill it in just a little more.

-make 9 to 10 petals of the darkest shade of pink (i used 9)

making the petals:

*i precut some of my fusible webbing in skinnier sections so it would be easier to trace my petals in sections for the different shades.
-cut out your petal template and with a pencil trace on your fusible side (it will be a little shinier than the non fusible side) your petals.
- do enough petals for each color (remember make a couple extras so you can play around and see how full you want it)

-place your fusible webbing (fusible side up) on top of your fabric.

-using your drawn lines as your guide, sew ON the petal lines.
-do this for all your petals.

-cut out your petals (cut them close to the sewn seam, around 1/8" out)

-once you have your cut out petals, gently pull your interfacing away from the fabric.
-with scissors, cut a small long slit in the middle of the webbing.

-turn inside out, use a straight pin to pull out those pesky points.

-iron your petals. (the fusible webbing will adhere itself to the inside of the petal and give you crisp edges.

-start placing the lightest petals in your right hand bottom corner.

-grab the other shades and start fanning out your petals by placing them in between and slightly under the first set of petals.
*notice that i played around with petals and started out with only 6 medium shade petals... 

*and here it is with the 7 petals (that would of looked even better if little hands hadn't move them. life with kids helps you to learn to say "oh well" or sometimes in like this case "i love my kids, i love my kids, i love my kids...maybe if i keep saying it, i wont forget it at this moment that i love my kids.")
*the good news is that the glue works so well that i was going to ruin the petal if i kept trying to pull it off.

once you have your petals are where you want them, get your glue out.

gluing your petals:
starting with your darkest shade petals: 

-place some glue on the back of a petal (don't lose your placement so just do one or two at a time) and lightly coat the back of the fusible webbing. (use a painting brush if you have one, if not your finger will be just fine too)
*don't overdo the glue, you don't want it to seep through, because even though it's invisible it will "show" and get kind of crusty hard on the fabric side after it dries if it seeps through.
-continue to do this for each petal 
-once all of them are glued, walk away for a while till they dry.

okay once your petals are all dried...
Appliqueing your petals:
-if you've bound a quilt before then you know how to do invisible stitches. 
starting at the edge of the dark petals: 

- make your first stitch by bringing the needle up through the inside of the canvas bag, its tip emerging a tiny bit to the side of one of the petals. (i started with the outer most petals.)
-insert the needle back into the canvas, right next to the place where it emerged.(NEXT to it not right through the same place) 
-only go about halfway down with your needle and bring it back up about 1/4" from your first stitch. (the picture above shows what i am describing, just in a different part of the petals)

*because you have glued your petals down first, you do not need to applique like you would if you were appliqueing a quilt block. (less than 1/4" between stitches) the appliqueing on this project is more to make sure your edges don't fold up when you wash your bag.
-continue to applique around your outer petals.
-for the middle section petals, because there are more layers, just applique through the petals underneath the petal you are appliqueing. there is no need to go through 4 layers of fabric and webbing and then canvas to applique, just make sure you make your stitches go through at least one layer under it to adhere it so it will now fold up when you wash it.


by V and CO.